Jun 10, 2016 0 comment

“We manufacture an ISO container chassis; the “trailer” that holds the shipping container unloaded from ships. Presently, we blast the fabricated parts and two main I beams, weld them together in a jig, apply a zinc-rich primer and urethane topcoat, then install axles, tires, wiring, etc. The steel frame is about 3000 pounds after welding. Is powdercoating a viable option, and would it be as resistant to corrosion?”

0 Comments

“Yes powder coating would dramatically improve your corrosion resistance and is well suited for your application. The automotive industry currently powdercoats a variety of products used in vehicle undercarriages.

Your part size and weight can easily be accommodated in a well designed powder coating process. We suggest you contact us for insight on how best to proceed with your investigation.”

Was this answer helpful ? Yes / No